Valves
FIPA valve range is optimized for applications in vacuum and compressed air systems in automation systems. The product range includes valves with different technologies and sizes - from electromagnetic vacuum valves and pneumatic valves as well as electromagnetic valves for shut-off compressed air, through basic valves such as flow valves, touch valves, check valves, butterfly valves and manual valves.
Thanks to FIPA 2/2-way and 3/2-way valves, processes such as suction, blow-off and ventilation can be optimally controlled in vacuum systems. In very dynamic handling applications, this means a short cycle time due to the fast switching between suction and air inlet.
Elektromagnetyczne zawory próżniowe są przystosowane do złożonych systemów automatyki i mogą być sterowane przez sterowniki PLC lub przemysłowy komputer PC przy użyciu elektrycznych sygnałów przełączających.
FIPA oferuje wybór elektromagnetycznych zaworów próżniowych, które są sterowane bezpośrednio, zasilane sprężonym powietrzem i wstępnie sterowane przez wewnętrzną próżnię.
Electromagnetic vacuum valves are adapted to complex automation systems and can be controlled by PLC controllers or an industrial PC computer using electrical switching signals.
FIPA offers a selection of electromagnetic vacuum valves that are directly controlled, powered by compressed air and pre-controlled by an internal vacuum.
Electromagnetic compressed air vacuum valves, also known on the market as pneumatic electromagnetically controlled vacuum valves, switch quickly between the suction and the air inlet, which ensures a short cycle time.
FIPA flow valves maintain the required vacuum level in automation systems and transfer systems by closing empty openings.
Touch valves
- Maintains the vacuum level in vacuum systems
- Mechanical scanning leaves unused suction openings closed
- Spring-loaded suspension allows for any mounting position
- Low susceptibility to dirt and very safe operation
Flow control valves with flow pin for handling of porous products
- Sealing of unused suction openings to maintain the system vacuum
- Limited leakage prevents premature triggering with porous workpieces
- Compact design
- Optimal installation position is vertical
Flow control valves with flow pin for harsh environmental conditions, self-cleaning
- Sealing of unused suction openings to maintain the system vacuum
- Limited leakage prevents premature triggering with porous workpieces
- Self-cleaning by blow-off
- Suitable for harsh environmental conditions (Heavy-duty)
- Optimal installation position is vertical
Flow control valves with filter, low leakage loss
- Sealing of unused suction openings to maintain the system vacuum
- Ball seat valve with filter (not suitable for high levels of dust or dirt)
- Suitable for short cycle times
- Limited leakage prevents premature triggering with porous workpieces
- Preset at the factory, 63.003 can be adjusted if necessary
- Vertical mounting, exception of 63.001 to 63.003: Any mounting position
Flow control valves with flow pin and filter, low leakage loss
- Sealing of unused suction openings to maintain the system vacuum
- Ball seat valve with filter (not suitable for high levels of dust or dirt)
- Suitable for short cycle times
- Low leakage prevents premature triggering with porous workpieces
Flow control valves without leakage loss
- Sealing of unused suction openings to maintain the system vacuum
- No leakage loss, which means it is particularly well suited for dense workpieces
- Closed valves are reset by switching off the vacuum
- Vertical mounting
- These valves work only if the vacuum is switched on after the vacuum cup has been set in position
"Inline" non-return valves
- Maintenance of the vacuum level in suction systems in cases of vacuum generator failure
- Can also be used with dense workpieces as an energy-saving system
- Two-sided quick fittings for fast installation in existing vacuum systems
- Robust metal bodies
- Compact design
- Can be mounted in any installation position
Non-return valve with integrated blow-off function
- Installation directly between vacuum cup and ejector
- Short release time thanks to blow-off function via compressed air inlet P
- Suitable as a safety valve: In cases of tubing damage, malfunction or emergency shutdown of the vacuum generator, the vacuum is maintained
- Metal screen made from stainless steel (Inox) with mesh width of 200 µ prevents dirt from entering the ejector
Non-return valves for very high volume flows
- Maintenance of the vacuum level in suction systems in cases of vacuum generator failure
- Suitable for installation between the vacuum pump and vacuum tank
- Prevents return flow of the oil into the vacuum system with vacuum pumps without an integrated non-return valve
- Can be mounted in any installation position
Throttle valves – screw-in type
- Limitation of suction flow at a constant vacuum level
- Reducing leakage at unoccupied vacuum cups maintains an adequate vacuum level for vacuum cups covered by products and thus prevents products from being dropped
- Manual adjustment using knurled screw
- Flexible installation using horizontal swivel air connector
"Inline" throttle valves
- Limitation of suction flow at a constant vacuum level
- Reducing leakage at unoccupied vacuum cups maintains an adequate vacuum level for vacuum cups covered by products and thus prevents
- products from being dropped
- Manual adjustment using knurled screw
- Simple installation in the line tubing
"Inline" one-way flow control valves
- Limitation of suction flow at a constant vacuum level
- Reducing leakage at unoccupied vacuum cups maintains an adequate vacuum level for vacuum cups covered by products and thus prevents
- products from being dropped
- Manual adjustment using knurled screw
3/2-way manual shut-off valves with quick fittings on both sides
- Switching on/off individual vacuum cups in vacuum systems
- Blow-off and ventilation of vacuum cups
- Easy in-line installation in the tubing line
2/2-way electromagnetic vacuum valves, directly controlled
- Very high suction power at small size for short evacuation time and fast vacuum build-up
- Short response time
- Robust brass housing and compact design for demanding applications
- Also suitable for positive pressure
- Included energy-saving coil for minimized power consumption and less heat development
- Energy-saving coil 24 VDC or 230 VAC and DIN plug IP65 included
- Further available voltages:
- - VAC: 115, 48, 24
- - VDC: 12
3/2-way solenoid vacuum valve, directly controlled
- Very high suction power at small size for short evacuation time and fast vacuum build-up
- Small, compact and lightweight
- Suction on/off, blow-off or ventilation of vacuum cups
- HNBR diaphragm allows for flexible installation due to resistance against low ozone concentrations
- Fast switching time
- Factory set NO, can be switched to NC by the customer
- To be mounted in any position
- Resistance against low ozone concentration
- Included in scope of delivery: coil 24 VDC and DIN plug
- Other voltages on request
3/2-way solenoid vacuum valve, directly controlled, NC
- Very high suction power at small construction size for short evacuation time and fast vacuum build-up
- Fast product release due to integrated vent port
- Suction on/off, blow-off or ventilation of vacuum systems
- Also suitable for positive pressure
- Short response time
- Robust brass housing in compact design for demanding applications
- Included energy saving coil for minimized power consumption and less heat development
- Included in scope of delivery: Energy saving coil 24 VDC or 230 VAC for minimized power consumption and less generation of heat and DIN IP65 plug
- Further available voltages:
- VAC: 115, 48, 24
- VDC: 12
- Standard seal is NBR, different material, such as EPDM, for higher temperatures on request
3/2-way solenoid vacuum valves, internally vacuum pilot operated
- Suction on/off, blow-off, ventilation of vacuum cups
- High suction power at small construction for short evacuation time and fast vacuum build-up
- Valve operation requires no compressed air connection due to internal vacuum control
- Required minimum vacuum level 40 %
- Short switching times
- NO: Safe gripping of workpiece during power failure
- Robust and light-weight housing
- 36.610 and 36.611: Coil and DIN plug included in scope of delivery
- 36.615 to 36.625: Delivery without coil and plug; please order: Power consumption: 24 VDC: 5 W, 230 VAC: 5 VA
3/2-way solenoid vacuum valves, pneumatically supported with spring reset
- Suction, blow-off, ventilation of vacuum cups
- High suction power at small construction for short evacuation times and fast vacuum build-up
- Short switching times
- Function: NC/NO as vacuum supply and blow-off / ventilation inlets can be exchanged
- NO: Safe gripping of workpiece during power failure
- Robust and lightweight housing
- 36.210 and 36.211: Coil and DIN plug included in scope of delivery
- 36.515 to 36.525: Delivery without coil and plug; please order:
- Power consumption: 24 VDC: 5 W, 230 VAC: 5 VA
3/2-way vacuum valve, pneumatically controlled with spring reset
- Suction blow-off, ventilation of vacuum cups
- High suction power at small construction for short evacuation time and fast vacuum build-up
- Assembly of pneumatically controlled vacuum systems
- Valve operation requires no electric connection
- Shortest switching times compared to vacuum piloted and compressed air supported valves
- 36.815 to 36.825: Function: NC or NO as vacuum supply and blow-off / ventilation inlets can be exchanged
- 36.335 to 36.341: Electronic valve for switching control independent of compressed air supply available on request;
- ordering example for version with electronic valve: 36.335_24VDC, 36.341_230VAC etc
Solenoid valves for compressed air, indirectly controlled, with spring reset
- Suitable for compressed air
- 36.060: for use e.g. to increase cycle times for ejectors without valve technology
- Example: vacuum and blow-off control for multi-chamber ejectors e.g. 65.410
- 1x compressed air vacuum generation
- 1x compressed air blow-off
- Example: vacuum and blow-off control for multi-chamber ejectors e.g. 65.410
- 36.061: for use e.g. as a blow-off control valve for 3/2-way vacuum valves
- Robust and lightweight housing
- Included in scope of delivery: coil and DIN plug 10.006 for 24 VDC, IP65
